Categories
Filter
  • Price
    € -
  • Rating
    0
    0
    0
    0
    0
  • Stock Status
    0
    0
    0
    0
    0
    0
  • Manufacturers
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0

100A/120A F-II (F10)

Nissan Datsun F-II. From year 12.1975 to 08.1980. F10 body. Wiki Nissan_Cherry and Nissan Heritage.

Display:
Show:
Sort By:
IN STOCK
Rear left brake cylinder
As on picture. Full kit with rubber, adjuster and attachment. With manual adjuster. Reference number 44101M0205   ..
As on picture. Full kit with rubber, adjuster and attachment. W..
26.00€
IN STOCK
Rear right brake cylinder
As on picture. Full kit with rubber, adjuster and attachment. With manual adjuster Reference number 44100M0205   ..
As on picture. Full kit with rubber, adjuster and attachment. W..
26.00€
IN STOCK
A14/A15 piston ring set +0,5 mm
Full set for 4 pistons. +0,5 mm Oversize Rings 1,2 mm; 2,0 mm; 4,0 mm Reference numbers 12035H7200 12035-H8910 12035H8920   ..
Full set for 4 pistons. +0,5 mm Oversize Rings 1,2 mm; 2,0 mm; ..
56.00€
IN STOCK
Camshaft bushing set
Size- STD Kit includes all 5 bushings. Fits all A-series A10-A15 Reference numbers 1300218000 13002H1020 ..
Size- STD Kit includes all 5 bushings. Fits all A-series A1..
34.00€
IN STOCK
Air filter wing nut
As on picture. Thread M6 Reference number 16551-08000 ..
As on picture. Thread M6 Reference number 16551-08000 ..
4.00€
IN STOCK
Gearbox output shaft seal
Fits for 4speed manual (F4W F60A) From *74-8  Shaft size 36,00 mm Outer diameter 55,09 mm Overall width 11,10 mm Housing diameter 55,00 mm Reference number 38342M3000 ..
Fits for 4speed manual (F4W F60A) From *74-8  Shaft size 3..
7.00€
IN STOCK
Exhaust Valve A13-A15
Stem diameter 8mm Overall length 103,8 mm Head diameter 30,00mm Fits  for A12A A13 A14 A15  DO not fit A10 or A12!! Reference number 13202-H6200 ..
Stem diameter 8mm Overall length 103,8 mm Head diameter 30,00mm ..
12.00€
IN STOCK
Intake Valve A13-A15
Stem diameter 8mm Overall length 103,8 mm Head diameter 37,00mm Fits  for A12A A13 A14 A15  DO not fit A10 or A12!! Reference number 13201-H6200 ..
Stem diameter 8mm Overall length 103,8 mm Head diameter 37,00mm ..
11.00€
Radiator drain plug
Thread M10x1,25. Gasket included. Reference number 21480-18000 ..
Thread M10x1,25. Gasket included. Reference number 21480-18000 ..
5.00€
IN STOCK
Cylinder head bolts set for   A12-A15 from 1974
Set includes all 10 bolts. Length 111mm Overall/Full length 120 mm. Thread M10x1,5 Hex head 14 mm. Fits A13, A14 and A15 Fits early (1974-1976) A12 IMPORTANT!!!    Do not fit A10 and early (1970-73) A12 because oil ga..
Set includes all 10 bolts. Length 111mm Overall/Full length 120..
56.00€
IN STOCK
Gearbox input shaft seal
As on picture.  Shaft diameter 28,00 mm Outer diameter 40,34 mm Width 7,00 mm Housing bore 40,00 mm Referece numbers 30402M0101 30402M7000   ..
As on picture.  Shaft diameter 28,00 mm Outer diameter..
8.00€
IN STOCK
Hand Brake cable
As on picture.  Fits  Sedan and coupe. Do not fit VAN Reference number  36451-M0200 ..
As on picture.  Fits  Sedan and coupe. Do not fit VAN..
15.00€
IN STOCK
Front brake disc For N10 with A14 /A15 engine
Outside diameter 238,8 mm Bolt circle diameter 96 mm Centre hole diameter 63,5mm Height 40mm Nominal thickness 9,5mm Minimum Thickness 8,6mm Fits N10 with A14 or A15 engine. Do not fit N10 with A10 or A12 or A13 engine. Bold ho..
Outside diameter 238,8 mm Bolt circle diameter 96 mm Centre..
40.00€
IN STOCK
PCV - Positive Crankcase ventilation valve
As on picture.  Reference number 11810-A3500 Fits all A-series engines.  ..
As on picture.  Reference number 11810-A3500 Fits all ..
8.00€
IN STOCK
Clutch release bearing
Inner diameter 21 mm, Height 16,5 mm, outer diameter 47 mm For all A-series engines A10-A15 Reference number 30435-M3000 30435-M0103 30435-M0100 ..
Inner diameter 21 mm, Height 16,5 mm, outer diameter 47 mm For ..
13.50€
IN STOCK
Thermostat 82C
For temperate climate zones Opening temperature 82 C  Gasket included Diameter 54 mm Reference number  21200-78500 21200-H7800 ..
For temperate climate zones Opening temperature 82 C  ..
8.50€
Thermostat 77C
For hot climates Opening temperature 77 C  Gasket included Diameter 54 mm Reference number 21200-78502 21200-H7802 ..
For hot climates Opening temperature 77 C  Gasket incl..
8.00€
IN STOCK
Lug stud
Price is for 1 lug stud. Type: Serrated Stud Thread: M12x1,25 Knurl diameter: 12,90 mm Length: 35mm Shoulder length: 9,5mm Exact fit to N10 Reference numbers 40221M7100 40221M7101 40221M7000 40221M7001 40222M7001&n..
Price is for 1 lug stud. Type: Serrated Stud Thread: M12x1,..
1.50€
IN STOCK
Inlet & Exhaust manifold gasket set. A14 oval..
AS on picture.  Kit includes two Stove gaskets Inlet and Exhaust gasket reference numbers 14035H7400 14035H7401 14035H7410 14035H7411 Stove gasket reference number 14097-U9500   ..
AS on picture.  Kit includes two Stove gaskets Inlet a..
10.00€
IN STOCK
Coolant hose upper, radiator to thermostat housin..
As on picture. CUT TO FIT Inside diameter 25mm Centerline length 422mm FOR F10 and N10 with A14 or A15 engine. Upper radiator connection is left from the radiator cap. See last picture. Reference numbers: 21501M6600 ..
As on picture. CUT TO FIT Inside diameter 25mm Centerline l..
23.00€
IN STOCK
Thermostat 88C
Opening temperature 88C. For colder climates.  Diameter 54mm. Gasket included.  Reference numbers: 21200-A3005 21200-78503 21200-78506 21200-P6500 21200-P7500 21200-P7905 21200-P7906 21200-Q9000 21200-V0105 21200-V0205 21200-..
Opening temperature 88C. For colder climates.  Diameter 54..
6.00€
Radiator fan switch
ON 88 *C OFF 81 *C Thread M16X1,5    Reference number 21595-M0205 21595-M0206   ..
ON 88 *C OFF 81 *C Thread M16X1,5    Reference nu..
20.00€
IN STOCK
Water pump
Water pump impeller material: Metal, Seal Material: Paper, Cast Aluminium, with seal, Blade Quantity: 8 Height 98mm Fit all A series engines Reference numbers:  NISSAN 21010-18001 NISSAN 21010-18002 NISSAN 21010-18003 ..
Water pump impeller material: Metal, Seal Material: Paper, Cast Alu..
23.00€
IN STOCK
Front shock absorber Premium
As on picture. Price is for one (1). Two needed per vehicle.  KYB Premium manufactured year 2020 Fitting position: Front axle left and right   Shock absorber type: Oil pressure  Fits 100A F-II, F10, VF10 N10, VN10 T..
As on picture. Price is for one (1). Two needed per vehicle.  ..
64.00€
IN STOCK
A12 Clutch pressure plate
For A12 Engine.  Outer diameter 192mm, Inner diameter 128mm, bolt hole circle 204mm.  Reference numbers: 30206-M0800 30206-M0801 30206-M0802 30206-M0803 30206-M0810 30210-M0800 30210-M0801 30210-M0802 30210-M0803 3..
For A12 Engine.  Outer diameter 192mm, Inner diameter 128m..
90.00€
IN STOCK
A12 Full clutch kit
Full clutch kit for A12 Engine. Clutch disc: Outer diameter 190mm, Inner diameter 132mm, Teeth quantity 24, Hub Profile 25,6 Pressure plate: Outer diameter 192mm, Inner diameter 128mm, Bolt hole circle dia. 204mm Relese bearing:Outer d..
Full clutch kit for A12 Engine. Clutch disc: Outer diameter 190..
118.00€
A12 Clutch disc
For A12 engine Outer diameter 190mm, Inner diameter 132mm, Teeth quanity 24, Hub profile 25,6 Reference numbers: 30100-M0800 30100-M0801 30100-M0802 30100-M0803 30100-M5600 30100-M7000 30100-M7001 30100-M7002 30100-M7091 30100-M9000 30100-..
For A12 engine Outer diameter 190mm, Inner diameter 132mm, Teet..
30.00€
IN STOCK
A10 Clutch pressure plate
For A10 Engine with 160mm clutch. Outer diameter 160mm; Inner diameter 110mm; Bolt hole circle diameter 179mm.   Reference nr 30206-M0202 30206-M0203 30206-M0204 30206-M0205 ..
For A10 Engine with 160mm clutch. Outer diameter 160mm; Inner d..
132.00€
IN STOCK
Carburattor gasket kit A (A12)
As on picture.  For A10 engine carburettors DCG 286-6D 16010-M5700 and DCG286-22 16010-M5705 For A12 engine carburettors DCG306-6D 16010-M3701 and DCG306-55 16010-M3705 Reference numbers: 16455-H6200 16455-H6201 16455-M0107 16455-..
As on picture.  For A10 engine carburettors DCG 286-6D 160..
16.00€
IN STOCK
Crankshaft gear
As on picture.  Lower timing gear on crankshaft. Fits all A10-A15 ..
As on picture.  Lower timing gear on crankshaft. Fits ..
14.00€
IN STOCK
Timing set
As on picture. Fits all A-series A10-A15 Kit includes:  Gasket 13044-H1000 Seal ring 13510-h1010, 13510-h1000 Sprocket Crankshaft 13021-H1000 Sporcket Camshaft 13024-18001 Chain Camshaft 13028-18001 Chain tensioner..
As on picture. Fits all A-series A10-A15 Kit includes:  ..
88.00€
IN STOCK
Front Brake hose
Lenght 300 mm Ends Inner/inner Reference numbers: 46204M4900, 462101HK5A, 4620489915 4620489914   ..
Lenght 300 mm Ends Inner/inner Reference numbers: 46204M490..
8.00€
IN STOCK
V-Belt A10-A12
For A10 and A12 engines. For engines there alternator locates same side as manifolds. Reference: 11720-18002  ..
For A10 and A12 engines. For engines there alternator locates same ..
4.20€
IN STOCK
Hitachi distributor rotor arm
AS on picture.  Reference number: 22157-71300 22157-76500 22157-78500 22157-D1200 22157-H1000 22157-H1001 ..
AS on picture.  Reference number: 22157-71300 22157-76..
2.60€
IN STOCK
HOSE lower Radiator to Switch housing
Please see picture. Original vs product you will get. Hose needs Cut to fit. Reference number 21503M0205 21502m0206 21503m3002 21503m3003 ..
Please see picture. Original vs product you will get. Hose needs Cu..
17.00€
IN STOCK
Hitachi distributor Contacts
Contacts for hitchi distributor on engine A10-A15. Reference numbers: Hitchi 4461-3330, 4461-4330AY, 44a5-13301 Nissan: 22145-18005, 22145-71301, 22415-73415, 22415-78506, 22145-89900, 22145-89901, 22145-89905, 22415-u6001, 22145-..
Contacts for hitchi distributor on engine A10-A15. Reference nu..
5.00€
IN STOCK
Hitachi Distibutor cap
Cap for Hitachi Distributor on A10-A14 engine.    Reference numbers: Hitachi: 4461-1700, 4461-2700B, 82311214 Nissan: 15501-208, 22162-21007, 22162-71300, 2216271312, 22162-N8801, 22162-N8801MP ..
Cap for Hitachi Distributor on A10-A14 engine.    ..
7.00€
IN STOCK
Rear spring
Same as Original.  Outer diameter 102 mm. Free length 225 mm.  Old on pictures just for comparison.  Fits E10, F10 and N10 Reference numbers 5020M7009 55020M7911 55020-M0200 55020-M1400 55020-m3401 55020-m3800 5502..
Same as Original.  Outer diameter 102 mm. Free length 225..
63.00€
IN STOCK
Spark plug leads kit
 Coil lead included. Fits for A12 which has ignition distributor in the middle of the engine!!  Fits A14 and A15 Do not fit A10 and A12 (Early A series engines) with igniton distributor in front of the engine!! Reference ..
 Coil lead included. Fits for A12 which has ignition distr..
18.50€
IN STOCK
A14-A15 Air filter Oval
As on picture. Oval shape.  For A14 and A15 engine. Reference number 16546M5600 ..
As on picture. Oval shape.  For A14 and A15 engine. Re..
13.00€
IN STOCK
Rear drum brake hardware kit
Full rear drum brake hardware kit.  As on picture.   Reference numbers: Pin- 44081M4901 / 4408M4902 Support Spring-  4483W5200 Spring cup- 44084U9200 Main springs- 44091M4900 44090M4900   ..
Full rear drum brake hardware kit.  As on picture. &n..
17.00€
IN STOCK
Thermostat housing/Outlet
As on picutre. Reference number 11060-M0100 ..
As on picutre. Reference number 11060-M0100 ..
28.00€
IN STOCK
Brake pad support springs
As on picture. packing is for 2 springs.   ..
As on picture. packing is for 2 springs.   ..
1.00€
IN STOCK
Brake pad pin and clip
As on picture.  PIn reference numbers 4121728500 4121728501  Clip 41049M3201  ..
As on picture.  PIn reference numbers 4121728500 412172850..
2.20€
IN STOCK
Brake pad hardware kit
As on picture. Pin not included in the kit. 2 required.     ..
As on picture. Pin not included in the kit. 2 required. ..
6.00€
IN STOCK
Shock absorber rear
As on picture.  Reference number 56210-M0755   Fits E10 and F10 van (Farmeri) ..
As on picture.  Reference number 56210-M0755   ..
38.00€
IN STOCK
Thermostat housing gasket
As on picture, For A14-A15 engine. Needs cut-fit for A10-A13 Reference number 1106218000 11062H7201 A1062H7201 ..
As on picture, For A14-A15 engine. Needs cut-fit for A10-A13 ..
1.00€
IN STOCK
Rear brake cylinder
As on picture. Reference number 44100M7000   Fits to  NISSAN N10 1979-1982 NISSAN F10 1976-1978 NISSAN SENTRA ..
As on picture. Reference number 44100M7000   Fits ..
10.50€
IN STOCK
Brake and clutch pedal rubber
As on picture. Reference number 46531D0110 46531M3000   Fits to  NISSAN 200SX 1977-1988 NISSAN 210 1979-1982 NISSAN 310 ..
As on picture. Reference number 46531D0110 46531M3000  ..
7.00€
IN STOCK
Engine rubber mount
As on picture.  For engines A14-A15 But fits as well A10 and A12  Reference number 11221-M8300 11220M3001 11220M7011   ..
As on picture.  For engines A14-A15 But fits as well A10 a..
28.00€
IN STOCK
Inner tie rod end
Total lengh 225mm.    Reference number 48521-M3000, 48521-m3001, 48510-M3070, 48521-M7000 ..
Total lengh 225mm.    Reference number 48521-M300..
16.00€
IN STOCK
Gearbox mount
Gearbox mount.  Fits all A series engines A10-A15 Reference number 11320-M0201 ..
Gearbox mount.  Fits all A series engines A10-A15 Refe..
49.00€
IN STOCK
Sway bar end rubber kit
Full kit for one side. Includes bushing and hardware. Reference number 56125-18000 ..
Full kit for one side. Includes bushing and hardware. Reference..
8.00€
IN STOCK
Clutch hose
Length 320mm Thread M10x1 Fits all A series engines Reference numbers 46211-89917 46211-01A17 46201-B6000 46201-89917 46221-89917 ..
Length 320mm Thread M10x1 Fits all A series engines Referen..
9.00€
IN STOCK
Upper engine mount
Fits all Datsuns with A series engines.    Reference number 11401-M0202 ..
Fits all Datsuns with A series engines.    Refere..
26.00€
IN STOCK
Clutch operating cylinder
3/4 Cylinder.  Fits F10 and N10 Will fit to E10/100A if old rod is used or new one is cut shorter.  ..
3/4 Cylinder.  Fits F10 and N10 Will fit to E10/100A i..
25.00€
IN STOCK
Oil filler cap for all A-series engines
Fits to all A series engines.  Gasket included.    Reference number 15255-15853 ..
Fits to all A series engines.  Gasket included.  ..
9.00€
IN STOCK
Brake pin locking pin/spring 4pcs
Spring for locking brake pads attachment pin.  You will get 4 pins/springs same as on the picture.         ..
Spring for locking brake pads attachment pin.  You will ge..
5.00€
IN STOCK
Brake wedge locking pin/spring 4pcs
Locking pin.  You will get 4 pins/springs marked on the picture with yellow.   OEM reference: 41049-M0800 ..
Locking pin.  You will get 4 pins/springs marked on the pi..
5.00€
IN STOCK
Coolant temp sensor
Without attachment nut.  Fits all A-series engines  OEM reference 25080-89900, 25080-89902, 25251-37700     ..
Without attachment nut.  Fits all A-series engines  ..
11.00€
Rear right brake hose
Length 251 mm Inner diameter on both ends 9 mm.  Reference numbers: 46201-89909 4621101A09 ..
Length 251 mm Inner diameter on both ends 9 mm.  Refer..
7.00€
IN STOCK
Axle Joint Boot kit
As on picture. Metal bands and grease included in the kit.  Fits on both sides. Wheel and Gearbox side.   Reference number 40089-M0200 40089M0200 40088M0200 40088M0205 Fits to: E10, F10 and N10 with A10 or A12 engine...
As on picture. Metal bands and grease included in the kit. ..
8.00€
IN STOCK
Front brake disc. Please make sure it fits!
Price is for pair. Fits Datsun 100A Kombi F-II 1,0 (WBLF10) From 12.1975 to 08.1980. Can vary by country. Please make sure measurements are same as old! Diameter 218,5 mm  Centre hole 64 mm Height 40 mm   Referenc..
Price is for pair. Fits Datsun 100A Kombi F-II 1,0 (WBLF10) From 12..
53.00€
IN STOCK
Rear brake hose
Lenght 240 mm  Inner+Inner  For E10 and F10 fits only rear left side!! For N10 fits on both rear sides L+R Reference numbers: 46202-89909 46202-U6700 46212-01A09 46212-89909 ..
Lenght 240 mm  Inner+Inner  For E10 and F10 fits ..
7.00€
IN STOCK
Fuel lid lock
Original fuel lock. Mounting clip/bracket not included.  Reference numbers 76960-H1001 Fits to; NISSAN 71-79 DATSUN 620 PICKUP B110 B210 120Y SUNNY 1200     ..
Original fuel lock. Mounting clip/bracket not included.  ..
40.00€
Full gasket set A14-A15
Full gasket set. With cylinder head gasket and valve stem seals. For A14-A15 engine.   Reference numbers 10101H7225 10101H7227 10101H7825 10101M9528 10101M9529 ..
Full gasket set. With cylinder head gasket and valve stem seals. ..
47.00€
IN STOCK
Head gasket A10
STD Head gasket for A10 Engine.   Reference numbers: 1104418001  1104418002  11044H1000  11044H1001 11044H1025  11044H3901  ..
STD Head gasket for A10 Engine.   Reference numbers: ..
11.00€
Door weatherstrip by meter
Sold by meter. Please measure the needed length on your doors.  Fits E10 and F10.  N10 original is with clips. Profile is same. Can be glued on.  Recommended glue: Loctite 424 or special weaterstrip glue.  DIY&n..
Sold by meter. Please measure the needed length on your doors. ..
8.00€
IN STOCK
Wire hose clamp
Same as Datsun orginal. Fits for hoses with outer diameter 33-38 mm Reference numbers: 08723-13600 08723-13800 ..
Same as Datsun orginal. Fits for hoses with outer diameter 33-38 mm..
4.00€
IN STOCK
Oil sump plug gaskets 10pcs
Oil sump plug gaskets. Spring loaded. Dimentions 15,5x22,5x3. Material: Copper.  Price is for 10pcs. Nissan reference 11026-61000 ..
Oil sump plug gaskets. Spring loaded. Dimentions 15,5x22,5x3. Mater..
8.50€
IN STOCK
Oil sump plug+gasket Kit
Tread size 3/8x11  Hexacon head 22mm    Nissan reference number 11128-69200 + seal 11026-61000 ..
Tread size 3/8x11  Hexacon head 22mm    ..
7.00€
IN STOCK
Valve stem seals KIT 8pcs
Price is for KIT 8x valve stem. NOT as orginal but fits as well for A10 and A12 Reference numbers 13207-G2402 13207-V1700   ..
Price is for KIT 8x valve stem. NOT as orginal but fits as well for..
8.00€
IN STOCK
Fuel filter
Fits very well into original bracket. Lengh 88mm, diameter 54 mm IN/OUT 7,3mm  Reference numbers: 16400-E3000 16400-E3001 16400-H8500 16400-H8501 16400-W1100 16400-W1105 16400-A0600    ..
Fits very well into original bracket. Lengh 88mm, diameter 54 mm IN..
2.50€
IN STOCK
Sway bar end bushing
As on picture. 2pcs on each side.    Reference number 56125-18000, 5461201P00, 56112-09400 ..
As on picture. 2pcs on each side.    Reference nu..
2.00€
IN STOCK
Clutch disc for  A10 engine.
Clutch disc. Number of teeth: 24; Diameter: 160 mm;  Reference numbers: 30100-M0201 30100-M0202 30100-M0203 30100-M0204 30100-M7700         ..
Clutch disc. Number of teeth: 24; Diameter: 160 mm;  Refer..
31.00€
IN STOCK
Valve stem seal set
As on pictures. One set has 8 seals.  Older umbrella style. Used on A10 and A12 engines.  Reference numbers: Nissan: 13219H1000     ..
As on pictures. One set has 8 seals.  Older umbrella style..
6.00€
IN STOCK
Tie Rod End Outer
Tie Rod End with lubrication nipple and locking nut.   Reference numbers: Nissan: 48520-M0225, 48520-M3025, 48510-M3025 ..
Tie Rod End with lubrication nipple and locking nut.   ..
10.50€
Fuel pump
Fuel pump. Gasket included. Fits A12-A15 Reference numbers: Nissan: 17010-H6226, 17010-M0801, 17010-M7926, 17010-H6225, 17010-H6227 17010H6200 17010H6201 17010H6202 17010H6203 17010H6225 17010H6227 17010H7228 17010H..
Fuel pump. Gasket included. Fits A12-A15 Reference numbers:..
44.00€
Front Lower Ball Joint
Lower Ball Joint    Reference numbers: Nissan: 40160-M302, 40160-M3025, 40160-M0225 ..
Lower Ball Joint    Reference numbers: Nissan..
16.00€
IN STOCK
Oil pressure switch
Oil pressure switch  Reference numbers: Nissan 25240-89902 25240-89910 25240-Z5500 25240-D9700 25240-Y9501 25080-8900     ..
Oil pressure switch  Reference numbers: Nissan 25..
4.50€
IN STOCK
Carburettor repair kit for DCG306
Carburettor repair kit for Hitachi DCG306 and DCH306.  Includes everything on the picture.  Reference numbers 16455-H6200, 16475-H5000,  Fit for: Engines A12 with DCG306 carburettor Nissan: E10, N10, Sunny 140Y, 150Y..
Carburettor repair kit for Hitachi DCG306 and DCH306.  Inc..
36.00€
IN STOCK
Rear brake shoes
Diameter 180mm, width 30mm.  Reference numbers: 44060-M0200 44060-M0225 44060-M1025 D4070-M0200 D4070-M0200 ..
Diameter 180mm, width 30mm.  Reference numbers: 44060-..
39.00€
IN STOCK
Clutch slave cylinder repair kit. Nabco 17,5
Cylinder diameter 17,5 mm. Manufacturer: NABCO Fits also to: Datsun 140 2 ton truck, 2200 D Nissan A10, C120, Cabstar (F22, F23, H40), Pichk Up D21.  Reference numbers NISSAN 30620-28525 NISSAN 30620-28526 NISSAN 3..
Cylinder diameter 17,5 mm. Manufacturer: NABCO Fits also to: Da..
4.50€
IN STOCK
Valve cover gasket
Reference numbers NISSAN 13270-18001 NISSAN 13270-H1000 NISSAN 13270-H1010 NISSAN 5013022 NISSAN A850X6584..
Reference numbers NISSAN 13270-18001 ..
5.00€
IN STOCK
Piston Rings for 1cyl. A14-A15
  Cyl.Bore: 76.00 mm, Standard Size [STD]   Component No.: 1.2mm 001 CR P IKA, 2.0mm 026 P GOE13, 4.0mm 236 P GOE13   Fits for A14 and A15 engines.   ..
  Cyl.Bore: 76.00 mm, Standard Size [STD]   C..
11.00€
IN STOCK
Rear shock absorber
Reference numbers: 56210-M0225 Not for VAN ..
Reference numbers: 56210-M0225 Not for VAN ..
38.00€
IN STOCK
Air filter
Reference numbers: NISSAN 16546-18000 NISSAN 42145-5500 NISSAN 42145-5550 NISSAN 42145-5600 SUBARU 16546-K..
Reference numbers: NISSAN 16546-18000 ..
7.00€
IN STOCK
Oil filter
For A10-A15   Reference numbers: 15208-H8911, 15208-H1010, 15208-H1011 ..
For A10-A15   Reference numbers: 15208-H8911, 15208-H1..
5.50€
IN STOCK
Transverse link bush
  Reference numbers: 54535-M0202, 54504-m3000   ..
  Reference numbers: 54535-M0202, 54504-m3000   ..
30.00€
IN STOCK
Brake light switch
Reference numbers: 25320-H1000   ..
Reference numbers: 25320-H1000   ..
8.50€
Gasket between intake to exhaust manifold
OEM Gasket  For A10-A12 Nissan 14005-18001 ..
OEM Gasket  For A10-A12 Nissan 14005-18001 ..
18.00€
IN STOCK
Crankshaft seal timing end
38X55X9 OEM Reference: NISSAN 13042-18000 NISSAN 13510-18000 NISSAN 13510-H1000 NISSAN 13510-H1001 NISSAN ..
38X55X9 OEM Reference: NISSAN 1304..
3.00€
IN STOCK
Crankshaft seal Flywheel end
60X82X12 OEM Reference: NISSAN 12279-H1000 NISSAN 12279-H18000 NISSAN 12279-H18001 NISSAN 12279-H2300 NISSAN ..
60X82X12 OEM Reference: NISSAN 122..
2.20€
IN STOCK
Piston Rings for 1 cyl. A10-A13
Cyl.Bore: 73.00 mm, Standard Size [STD]   Component No.: 2.0mm 001 CR P, 2.0mm 026 P GOE, 3.947mm 236 P G   Fits for Nissan Datsun E10/A10/A12/J13/E13/J20 engines. ..
Cyl.Bore: 73.00 mm, Standard Size [STD]   Component No..
11.00€
IN STOCK
Main Bearings, crankshaft +0.25
Oversize 0.25 FITS A12-A15     ..
Oversize 0.25 FITS A12-A15     ..
45.00€
IN STOCK
Main Bearings, crankshaft STD
Standard size [STD] Component No.: 63-060-(4), 63-060-(5), 63-060-1, 63-060-2, 63-060-3 Position/Degree: 1,5 (63-060-1), 1,5 (63-060-2), 2,4 (63-060-3), 3 (63-060-(4), 3 (63-060-(5)   OEM Reference numbers: NISS..
Standard size [STD] Component No.: 63-060-(4), 63-060-(5), 63-0..
20.00€
IN STOCK
Big end bearings STD
Standard size Fits for A10-A15 OEM Reference numbers: NISSAN 12111-18000 NISSAN 12111-20900 NISSAN 12111-20910 NISSAN 12111-H1..
Standard size Fits for A10-A15 OEM Reference numbers: ..
27.00€
IN STOCK
Big end bearings +0.25
Oversize: 0.25 mm Fits for A10-A15 ..
Oversize: 0.25 mm Fits for A10-A15 ..
27.00€
Clutch master cylinder
Bore 5/8 Inner thread 9mm Mounting holes distance 58mm Exact fit F10. Fits E10 but pipe needs to be replaced or bent as pipe attachment is on side not under as original.  OEM reference number: 30610-N4001 30610-H2502 30610-B8000 3..
Bore 5/8 Inner thread 9mm Mounting holes distance 58mm Exact fi..
28.00€
BERXEL @ 2020 | Turvalisuse tagab: veebikaitse.eeWebShopper